Screen | UASB Reactor

UASBR

UASBR
Applications
Environmental Parameters
Operating Parameters
Sludge Characteristics
Design Guidelines
Design
Operating Guidelines
Post Treatment
- Activated Sludge Process
- Extended Aeration Process
Help

Screen

Input Parameters

Maximum Flow(cum/d):

Minimum Flow(cum/d):

Average Flow(cum/d):

Way of clearing

Manual Mechanical

Output

Diameter of bar(m):

Spacing(m):

Screen Width(m):

Depth(m):

Bed Slope(m):

Design Based On

OR Your Own Loadings

Select correct option depending upon COD range

Very Low Strength (COD upto 500 mg/L)
Low Strength (COD between 500 to 750 mg/L)
Medium Strength (COD between 750 to 2,000 mg/L)
High Strength (COD between 2,000 to 4,000 mg/L)
Very High Strength (COD between 4,000 to 10,000 mg/L)
Extremely High Strength (COD greater than 10,000 mg/L)

What are the problems of your reactor?

Lowering of Efficiency
Excessive Foaming
Excessive S.S. in Foaming
Lower Gas Production
No Feed Condition
Sludge Waste Scheduling

Next

If your problems remains unsolved even after the application of reccomendations given by software then please contact Dr. M.M. Ghangrekar at m_ghangrekar@rediffmail.com.

Help

In all design forms enter all input values carefully with proper unit and then click Calculate button to get an output results.

Message